How To Turn On Sennheiser Headphones?

Being a new user, the first illusion goes around your head is, “how to turn on Sennheiser headphones?” First, tap and hold on to the on/off button for at least 2 seconds. Then the LED indicator will flash up blue 3 times. Thus a voice prompt will send you a confirmation, “Power On”. 

Sennheiser is one of the most top and widely used brands all around the world. That’s why the brand has a huge range of users. Though the brand Sennheiser sustains you with a lot of painless ways to run their headphones. But some still get senile about all the processes of the brand. So, scroll down to be crystal clear about the effortless methods.

Things need to be fixed before getting started

Before getting started there are some crucial steps you must follow. Otherwise, you might face some trouble with turning on your Sennheiser headphones. 

Charge the provided rechargeable battery

The brand Sennheiser provides you with its best qualified rechargeable battery. But the battery is not kept fully charged for the new one upon delivery. That’s why before using the headphone for the very first time, you need to charge the rechargeable battery. While charging the battery, be cautious; the charging cycle should be accurately completed without any interruption.

Install the Sennheiser Smart Control App on your device

The Sennheiser brand provides you with their official app titled Sennheiser Smart Control App. The app allows you to generate all the essential functions and settings. For example, increasing or decreasing the volume, activating active noise cancellation, and much more like these. 

So, before beginning with the headphone, install the Sennheiser Smart Control App on your smartphone. The app is available on the Google play store and you can easily get it absolutely for free. You can get it through the App Store as well.

How to turn on Sennheiser wireless headphones?

• First, make sure the headphones have enough battery life to run.
• Take a look at the earcups and hold on to the first vertical button until the voice prompt confirms you “Power On”.
• The LED indicator will blaze up blue
• Hold on to the same button for a minimum of 5 seconds again.
• The LED indicator will blaze up red and blue
• Go to the settings of your phone and connect your headphone with Bluetooth.

Thus your Sennheiser wireless headphones are going to be turned on.

Connect your headphone to a Bluetooth device

You must have to connect your headphones to your smartphone via Bluetooth. The question may go around your mind, how to turn on Bluetooth on Sennheiser headphones? To turn on Bluetooth and attach your smartphone and headphone, you will have to go through a process. The process of both devices is going to be connected, called pairing. 

For the first time, while switching on the headphones, the pairing mode activates on its own. But not all the time. You will have to keep them on pairing mode while essential. Now you may be thinking, 

how do I put my Sennheiser in ear headphones in pairing mode? 

Here is the whole process given for you to pair your Sennheiser headphones:

• Switch your Sennheiser headphones off.
• Put the headphone nearby to the Bluetooth device. The device should be close to a maximum of 20 cm.
• Tap and hold on to the on/off button for at least 4 seconds.
• Activate Bluetooth on the Bluetooth device you want to pair.
• Via the menu and begin the search for a new Bluetooth device.
• All activated Bluetooth devices in the vicinity will be displayed on your Bluetooth device.
• Among the list of Bluetooth devices, tap “HD 450BT”. 
• Put in the default pin code of 450BT “0000”, if necessary.
• The LED indicator will blaze up blue 3 times.

Thus the pairing will be established. Soon, you will get a message from the voice prompt, “Connected”. Are you a Sennheiser 340BT user confused about how to pair Sennheiser headphones 350bt?Don’t be tense. The process is absolutely the same, just like the above ways. Both default pin codes are absolutely the same for these models.

Put the headphone on and adjust the headband

Adjustment is a must for good probable wearing comfort and the best sound quality. A proper adjustment of your headband will be able to fit the earpad appropriately throughout your ear and head.

Here are the ways you may follow to adjust the headband properly:

• Pick up the headphones and wear them.
• There are two signs lettered L for the left side and r for the right side inside your headphones. They are marked to guide you about how you should place them accurately.
• Slide the headband up or down until your ears are wholly covered with the ear pads.
• You will feel a slightly gentle pressure while placing the ear pads accurately around your ears.
• Your ears need to be completely surrounded by your ear pads.

Thus you can assume your headband and ear pads are placed absolutely. Appropriately placing the headband and ear pads will uplift the sound quality while listening. Moreover, it will sustain absolute comfort for your ears even for a long duration.

How do I turn on my Sennheiser headphones?

After accomplishing all the essential steps, now it’s time to turn on your favorite Sennheiser headphones. You will just have to go through some effortless steps to switch on the headphones. 

How do I turn on my Sennheiser 450bt?

• Unfold both of your headphone earcups.
• Tap and hold on to the on/off button for at least 2 seconds.
• The LED indicator will blaze up blue 3 times.
• The voice prompt will send you a confirmation “Power On”.
• Activate Bluetooth on your Sennheiser headphones.
• The LED indicator will blaze up again, blue 3 times.
• A voice prompt will send a confirmation message “Connected”.

That’s how you can easily turn on your Sennheiser 450BT headphones. But there are some precautions you must need to look at before turning on the headphones. 

• Check out the volume level: A high level of sound volume may cause constant damage to your hearing. So, before turning on your headphones, cautiously check out the volume level of your headphones. Then adjust the volume level to a low if essential.

• Bluetooth should be activated: You just need to ensure the Bluetooth is activated earlier on. Otherwise, it will interrupt the switching-on process on your headphone.

Why won’t my Sennheiser headphones turn on?

The key reason your Sennheiser headphones won’t turn on may be an internal electronic mishap caused by a power rush. In this situation, an electronics reset is crucially required. 

• First, detach the transmitter from the power source and audio source as well.
• Put out the batteries from the headphone at just the same time.
• Leave the system just like that for a minimum of 15 minutes.

Thus the internal electronics unit will get a way to reset again to factory settings. After resetting the headphones will be required to be paired again with the transmitter. That’s how the issue can be solved effortlessly. 

Final Word

The Sennheiser brand is always ready to sustain you with the best moment. That’s why this brand is committed to providing you with all the easy methods to enjoy the precious moment. But if you still feel nervous about carrying on with the headphones, the above methods should be enough to resolve all. So, now enjoy all of your dearest tones with your favorite Sennheiser headphones.

Another Sennheiser Headphones Guide For Soundsvia User

How To Turn Off Sennheiser Headphones
How To Clean Sennheiser Ear Pads